6 x 22 mm SWIRL BLANKS FLAPS repair delete kit with intake gasket for BMW M47 US

In stock

Estimate shipping

Weight: 50g




As for BMW's suffer a common issue with the swirl flaps in the inlet manifold. The screws holding the butterflies can come loose can cause severe damage to your engine. The easiest way to prevent this damage occurring to your engine is to replace these swirl flap bungs with these. The AW-5083 aluminum alloy is characterized by high fatigue strength, very good weldability and corrosion resistance. It is suitable for hardening and anodin. It is used in the automotive industry, shipbuilding, mechanical engineering, welded constructions, in the construction of foam molds, and in the construction of general purpose equipment.


High quality part, perfect match to your original car.

There are 6pcs 22mm bungs with intake manifold gaskets kit.

The O rings are supplied with the bungs.

Swirl flap substitute of the suction manifold (22 mm) with Viton O-rings

Material resistant to oil derivatives, as well as high and low temperatures

The bungs are machined from high grade aluminium using state of the art CNC technology.

Precision machined to the finest tolerances for the perfect fit, maintaining that all important air tight fit

Swirl flap substitute made of the aluminum alloy is characterized by high strength and mechanical properties

Professional quality of manufacturing

Fitted with a high quality Viton seal

Easy to install. Directly swap with your existing swirl flaps, simply push in and screw in place.

There will be no difference in performance from your vehicle, you may even notice an improvement if your swirl flaps have deteriorated.




Type:Filling Plates

Color: Silver and Red (as shown)

Diameter: 22mm/0.866"

Material: Rubber+ Aluminum

Package Include: 25pcs

Package Weight: approx. 150g

Fitment: For BMW 3/5/7 series X3 X5 X6

OE Number: [5850788];[ 11617790198];[ 93176515];[ LKJ101120L];[ 11612246];[ 11612246945];[ 2246945];[ 5850651];[ 93171555];[ 11612245439];[ 2245439];[228690];[ 11617800585]


All our products are in stock and ready for immediate dispatch 



There are two sizes of plugs available: Larger swirl flaps (33 mm) adequate for cars manufactured from 2004.Smaller swirl flaps (22 mm – available at other auction) adequate for cars manufactured to 2004.

For BMW engine codes and models as following:

3 Series E90/E46 M47TU M47 M57TU

5 Series E39/E60/E61 M47TU M57TU

7 Series E65 M57TU

X3 E83 M47TU

X5 E53 M57


E46 320d 2001-2005, E83 X3 2.0d (up to end of 2006)

M47TU2D20 updated in 2004 to M47TU2D20

E60/E61 520d, E87 120d, E90/E91 320d, E83 X3 2.0d - end of 2006 onwards

Previous M57 - 2000 onwards M57D25

2000-2003 E39 525d automatic transmission only.

M57N/M57TU - 2004 onwards M57TUD25

E60/E61 525d

M57/M57D29 - 1998 onwards M57D30

E39 530d automatic transmission only

E46 330d/330xd automatic transmission only

E38 730d automatic transmission only

E53 X5 3.0d, E38 730d, E39 530d

M57N/M57TU - 2002 onwards M57TUD30

E46 330d/330Cd/330xd

E83 X3 3.0d

E53 X5 3.0d

E60/E61 530d/530xd

E65 730d

E60/E61 535d

M57TU2D30 M57TU2D30 - 2007 onwards, facelifted E60 and E61

M57TU2D30-UL M57TU2D30-OL M57TU2D30-TOP

E90/E91/E92 325d

E60/E61 525d/525xd E65 730d

E90/E91 325d

E90/E91 330d/330xd




E60/E61 535d

E70 X5 3.0sd

E71 X6 xDrive35d

E83 X3 3.0sd

E90/E91 335d



6 x Intake manifold gaskets upper against the cylinder head cover

6 x Intake manifold gaskets lower against the cylinder head

6 x 22 mm swirl flap blanks

6 x O-ring

1 x manifold gasket between the agr valve and the intake manifold

If you need 6x33mm, please leave a message when you please orders.



«  You can send us your Vehicle Identification Number photo and let us check weather our product fit for your car or not.

«  Instruction is not included. Professional Installation Is Highly Recommended!

You may also like