Inspired Design

The gold dent lifter puller make of high quality material, at the bottom is silicone instead of ordinary rubber. It is very soft and not harmful for car paint and can be teared down. one screw on the top of the dent lifter is used to adjust the middle height of hand lifter.

Perfect Repair Effect

After completing the dent removal, your beloved car will still keep a beautiful surface, without the need of any sanding or paint touch up.

Unique Bridge Design

Upgrade Bridge dent puller kit , the bridge body design is more solid and stable, upgraded version knob, hexagonal groove for stronger adhesion, which is more easier to attach on the dent surface.

How to use the golden lifter dent puller?

  1. Clean the surface dent with a clean wet cloth.
  2. Put the glue stick into 20W glue gun and connect the power source and preheat for 5-10 minutes.
  3. According to the dent size to choose suitable pulling tab, you have 10 sizes gasket, then put the heated glue on puller tab, immediately place puller tab in the center of the dent and hold on until it sticks.
  4. Let the glue cool for about 8-10 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter.
  5. After the glue cooling, use a golden lifter dent puller to align and press the puller to pull up the dent. Repeat the above steps until dents pop up.
  6. After finishing the dent, use the 95% alcohol to clean the residual glue which on the car surface with plastic shovel.

Get The Product Now!