Water Pump + Timing Belt Kit

Water pump is a part of the coolant circuit. Usually the cause of the water pump failure is its wear. Permanent mechanical stress can result in leaks. Moreover, the pump can completely fail. If there appears coolant under the vehicle, this indicates a leak in the coolant circuit. When searching for a leak, it is necessary carefully to examine the water pump. If the water pump completely fails, it is necessary to substitute it. However, sometimes only gaskets on terminals are faulty. Then it is necessary just to replace them. 

Before you remove the water pump, it is necessary to bleed the coolant. It is not allowed using it again, it is necessary to recycle this coolant. After the old water pump is removed, it is necessary thoroughly to clean the surroundings. It is very important all the rust and scale to be completely removed. Finally, install the new pump and connect the new drive belt. In most cases it is advisable to renew the belt as well.

After the pump is installed, fill in the coolant. Then it is necessary to deflate air from the coolant circuit. The installation of water pump should be done according to the car parts maker's instructions. Improper installation can be the cause of the entire cooling system malfunctioning. Moreover, there may appear additional damage because of an improper water pump installation. If you have doubts, entrust specialists to replace the water pump. Do you need a new fan, crankcase, engine bonnet, slave cylinder, Park Distance Control, wishbone, brake cylinder, taillight or other spare car part? You can easily find and order all of them in our online store of car parts.