Strut Mount

Strut bearing connects the damper strut to the car body. In case of the direct connection with the car body damper strut would not be able to rotate and change the angle, but it is possible due to the bearing. As a rule, strut bearings are installed only on the front axle. For the rear axle thrust bearings are enough. Depending on the design some vehicles are equipped with an additional vibration absorption system. Commonly used materials are metal and rubber.

If the strut bearing is worn, it must be replaced. It also can fail as a result of an accident. Squeak when turning the steering wheel indicates about faulty bearing. Since the strut bearing provides comfort and safety, do not delay its repair. Repair should be done in the auto repair shop. First, remove the wheels. Then unscrew the damper strut, as the bearing is on top. It is not difficult to do, but requires experience and special tools.

In older cars strut bearings can fail because of wear, but more often it happens because of mechanical shock. Many drivers are scared with the strange noise that occurs when turning the steering wheel. As a rule, they speed way to a service centre. Only in exceptional cases faulty bearing as a threat for safety. In our Internet store you can order damper struts, wheel bearing, window lifters, rear view mirrors, brake disks, camshaft, and many others. You should definitely have a look at our wide assortment.

How to identify a faulty shock absorber strut mount

You can perform primary diagnostics of the shock absorber strut mount yourself. To do this, try to rock the vehicle by leaning on the hood. If the component is faulty, free play will be detected. In addition, you will have to inspect the mount. When doing this, pay attention to the condition of the rubber part of the component. If it is shifted or damaged, the mount requires replacement.